High quality applicator gun from metal with drip stop for primur cartridges. The price quoted is inclusive of VAT.

The single-sided high-performance tape Corvum 12/48 is the perfect solution for easy, quick and permanently airtight sealing of door and window frames on the inside. In addition, the tape is invisible behind cladding because it is precisely prefolded.The price quoted is inclusive of VAT.

The single-sided high-performance adhesive tape Corvum 30/30 is suitable for permanently airtight sealing of purlins, joists, corners and skylights on the inside. Corvum can be easily, quickly and reliably applied because it is uniquely prefolded.The price quoted is inclusive of VAT.

The high-performance primer Dockskin is the perfect solution for strengthening sandy, fibrous substrates, such as woodfibre boards, wood-based panel materials, gypsum fibre boards, plaster and stone. The SIGA products Wigluv, Rissan, Sicrall, Corvum, Primur and Twinet can be perfectly combined with Dockskin. They enable e.g. easy, quick and reliable creation of base joints. The price quoted is inclusive of VAT.

The single-sided high-performance adhesive tape Farmer is your perfect "companion" for permanent bonding in farming, gardening and hobby. And farmer is useful for many other tasks. The price quoted is inclusive of VAT.

Service riser shafts, Plant Rooms and ventilated car parking areas are often excluded from the tested airtight perimeter of the building and as a consequence there is often a need to airseal the service penetrations where they penetrate floor slabs Fastight Airmortar has been specifically developed to radically improve the degree of airtightness of multiple service penetrations between floors and can in certain circumstances be capable of taking foot traffic for maintenance purposes. Typical situations where Fastight Airmortar can be used are as follows: (1)Service penetrations in floors leading to sub-floor plant area (2)Penetrations and voids in floors above ventilated car park areas Fastight Airmortar is a fast setting gypsum mortar. As a consequence the system also has excellent fire protection and acoustic properties. Fastight Airmortar has been independently tested for airtightness by Building Analysis and Testing – a UKAS accredited test facility and was found to provide an excellent barrier to the passage of air.

Fastight Airseal Coating is a high performance coating specifically developed to radically improve the degree of airtightness of porous components that form part of the overall building airtight envelope. Typical situations where Fastight Airseal Coating can be used are as follows: (1) Improving the airtightness of exposed masonry which in general provides a very poor barrier to the passage of air. (2) Coating exposed mineral wool sections which exhibit little if any airtightness if left untreated. Fastight Airseal Coating can be applied by brush, roller or spray and exhibits excellent adhesion to the full range of building materials without the need for priming. Multiple coats my be required on some substrates. Fastight Airseal Coating has been independently tested for airtightness by Building Analysis and Testing – a UKAS accredited test facility and was found to provide radically improve the performance of masonry and mineral wool substrates.

The use of membranes and vapour control layers as the primary barrier to airloss in a roof is becoming increasingly common. Unfortunately some of the existing adhesive tape methods have been found to perform poorly under air pressure testing conditions with the consequent effect on the overall air leakage performance. Fastight Membrane Adhesive is a high performance adhesive specifically developed to seal lap and side joints between sections of roofing membrane. Typical situations where Fastight Membrane Adhesive can be used are as follows: (1) End laps between overlapping sections of membranes (2) Side laps between overlapping sections of membranes (3) Ensuring an adequate bond between edges of membranes and flashings, steel members or other components of the building Fastight Membrane Adhesive exhibits excellent adhesion to the full range of building materials without the need for priming. Fastight Membrane Adhesive has been independently tested for airtightness by Building Analysis and Testing – a UKAS accredited test facility and was found to provide an excellent barrier to the passage of air withstanding pressures of up to 60Pa.